LABTOC ® Analysis System
Features
- User friendly Windows-driven software
- Provides TOC and/or TC analysis
- Full on-screen & hardcopy reporting
- Range from 10 ppm to 4,000 ppm, fully adjustable
- Multi-point calibration with 'Best Fit' curves
- Print calc curve (with results)
- Fully automatic QC diagnostic
- Automatic re-calibration on QC failure
Description
LABTOC ® is a fast, reliable and highly accurate system for the laboratory analysis of sample water.
Simple to use, LABTOC® can be used by laboratory technicians with the minimum of training and still be relied upon to produce precisely accurate TOC and/or TC values from single or multiple samples with a range from 0-10 ppm to 0-4000 ppm.
LABTOC® consists of an organics analyser, based on proven PPM PROTOC® chemical technology, an auto sampler capable of feeding between one and eighty eight seperate samples to the analyser during a single run, and an IBM-compatible PC with exclusive, user friendly software, which both controls the analytical process and monitors the results.
Principle Of Operation
LABTOC® analysers use an ultra-violet - UV promoted persulphate oxidation, to determine the contamination of dissolved organic chemicals present in the sample. Various configurations are possible for TC - Total Carbon, TOC - Total Organic Carbon and TOC by difference (reporting the combined dissolved and volatile components). Firstly, inorganic carbonates can be automatically removed by sample pre-treatment using an acid sparge. A sample with reagent is then injected in to the reaction vessel. The vessel is continuously sparged by a carrier gas (typically nitrogen) liberating any CO2 gas, generated through oxidation. The resultant evolved CO2 is delivered to an Infra-red detection system. The CO2 plot is integrated and compared against a calibration curve to determine the reportable value.
Control And Monitoring Options
The LABTOC® analyser is controlled by PPM's exclusive Labmon Windows based software operating on an IBM compatible PC. Data is graphically displayed and stored to floppy disc for latter retrieval. The analyser may also be configured for automatic batch analysis using an auto-sampler and either a 48 or 90 place carousel.
Images/Media
LABTOC ® is a fast, reliable and highly accurate system for the laboratory analysis of sample water.
Simple to use, LABTOC® can be used by laboratory technicians with the minimum of training and still be relied upon to produce precisely accurate TOC and/or TC values from single or multiple samples with a range from 0-10 ppm to 0-4000 ppm.
LABTOC® consists of an organics analyser, based on proven PPM PROTOC® chemical technology, an auto sampler capable of feeding between one and eighty eight seperate samples to the analyser during a single run, and an IBM-compatible PC with exclusive, user friendly software, which both controls the analytical process and monitors the results.
Typical Specifications
Measuring Range: |
0-10 to 4,000 PPM |
TL Option: |
0-500 to 40,000PPB |
Repeatability: |
+/- 2% or better |
Detection Limit: |
1% of calibrated range |
Analysis Mode: |
TC/TOC (TOC by difference as an option) |
Analysis Time: |
Typically 6 minutes / sample |
Analyser Dimensions: |
550 (h) x 300 (w) x 550 (d) mm |
Weight: |
25 Kg |
Power Supply: |
110/230VAC 50/60Hz |
Related Downloads
LABTOC® consists of an organics analyser, based on proven PPM PROTOC® chemical technology, an auto sampler capable of feeding between one and eighty eight seperate samples to the analyser during a single run, and an IBM-compatible PC with exclusive, user friendly software, which both controls the analytical process and monitors the results.
Contact
For more information on this product or for any other enquires, please use the details listed below:
Tel: +44 (0) 1732 882044
Fax: +44 (0) 1732 780190
E-mail: TOC@pollution-ppm.co.uk
For International enquiries, please contact one of our dealers listed on the following page - Click here